Hansgrohe Raindance Classic 18cm, 24cm and 30cm Overhead Showers

Raindance Classic AIR 180mm overhead shower, with 150mm diameter head, curving on sides towards edge to 158mm, wall mounted by 383mm projection (Ø 23mm) shower arm with wall cover plate. 180 water outlets and with Air Injection Technology choice of 3 spray modes: RainAIR, WhirlAIR and Balance AIR, AirPwer infuses air with water to give a more voluminuous spray and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre.

Please note: This item must be ordered with shower arm 230mm (27412000) "Bottom of the following page" Hansgrohe Raindance shower overheads

Colour: Chrome

Width: 158mm diameter

Suitable for: Pumped & Pressurised Systems

Raindance Classic 180mm AIR Plate overhead shower, with 18cm diameter head, curving on sides towards edge to 21.5cm, and 10cm long (Ø 27mm) ceiling connection. 105 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome (other finish options below).

Width: 214mm diameter

Height: 177mm from ceiling down to rim.

Suitable for: Pumped & Pressurised Systems

Raindance Classic 240mm AIR Plate overhead shower, with 24cm diameter head, curving on sides towards edge at 27cm, and 10cm long (Ø 27mm) ceiling connection. 180 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 18 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome (other finish options below).

Width: 270mm diameter

Height: 177mm from ceiling down to rim.

Suitable for: Pumped & Pressurised Systems

Raindance Classic 300mm AIR Plate overhead shower, with 30cm diameter head, curving on sides towards edge at 33cm, and 10cm long (Ø 27mm) ceiling connection. 225 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 22 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome (other finish options below).

Width: 330mm diameter

Height: 181mm from ceiling down to rim.

Suitable for: Pumped & Pressurised Systems

Raindance Classic AIR Plate 180mm overhead shower, with 18cm diameter head, curving on sides towards edge to 21.5cm, wall mounted by 383mm projection (Ø 23mm) shower arm with wall cover plate. 105 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Colour: Chrome (other finish options below).

Length: 496mm from wall to far edge of head.

Width: 214mm diameter

Suitable for: Pumped & Pressurised Systems

Raindance Classic AIR Plate 240mm overhead shower, with 24cm diameter head, curving on sides towards edge to 27cm, wall mounted by 383mm projection (Ø 23mm) shower arm with wall cover plate. 180 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 18 litres/min at 3 bar.

Colour: Chrome (other finish options below).

Length: 524mm from wall to far edge of head.

Width: 270mm diameter

Suitable for: Pumped & Pressurised Systems

Raindance Classic AIR Plate 300mm overhead shower, with 30cm diameter head, curving on sides towards edge to 33cm, wall mounted by 459mm projection (Ø 23mm) shower arm with wall cover plate. 225 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 22 litres/min at 3 bar.

Colour: Chrome (other finish options below).

Length: 624mm from wall to far edge of head.

Width: 330mm diameter

Suitable for: Pumped & Pressurised Systems