Hansgrohe Raindance Royale Overhead Shower

Raindance Royale AIR 35cm overhead shower. Solid-metal ultra-flat design with AIR injection technology and Rubit cleaning system.

For use with high flow rate thermostatic mixers.
You will also need a separate shut-off valve or alternatively a TRIO (not Quattro) 2-way diverter with integrated shut-off - 0.75 inch if being linked with a hand shower or body jets etc.
THIS ROYALE "SHOWER HEAD ONLY" option, is for if you require a THERMOSTAT, SHUT-OFF VALVE etc (see above links) in a particular AXOR RANGE, and NOT the standard Hansgrohe design, as shown in the "COMPLETE SET" option below.
Please see below for COMPLETE SET option, which includes all products required for this shower system.
Please also see below for the WALL or CEILING CONNECTOR, which are bought separately.

Flow rate: 38 litres/min at 3 bar.

It is recommended that you talk to a good plumber who can advise you on the size of stored hot water tank and hot water usage that you will require to operate this set-up for any given time.

Colour: Chrome

Width: 350mm diameter

Height: 70mm from pipe connection down to bottom of plate.

Suitable for: Pumped & Pressurised Systems

Ceiling connection adaptor - 0.75", for mounting Raindance Royale overhead shower onto the ceiling. With collar and ceiling fixation plate.

Colour: Chrome

Length: 100mm

Suitable for: Pumped & Pressurised Systems

Shower arm for mounting Raindance Royale overhead shower to the wall. 470mm projection with 90° elbow. With collar and wall fixation plate.

Colour: Chrome

Length: 470mm

Width: 30mm diameter

Suitable for: Pumped & Pressurised Systems