Hansgrohe Basin and Kitchen Mixer Angle Valves
Categories » Hansgrohe AXOR Basin, Bidet Mixer Taps And Controls: » Hansgrohe Basin And Kitchen Mixer Angle Valves
Schell are leading manufacturers of designer bathroom fittings and supply Hansgrohe with specialised products such as angle valves. Schell angle valves fulfil many important functions perfectly and offer all the advantages of easy installation. The Schell angle valves are screwed to the 0.5" hot and cold pipe work in the wall. Hansgrohe basin ,bidet and kitchen mixers come with 10mm compression fittings that simply connect to the other end of the angle valves - installation could not be easier. These angle valves allow unrestricted flow to such items as taps, WC, flushing boxes or bidets. Schell angle valves can be shut off as required, and if a tap needs to be repaired or replaced, only the affected unit, and not the entire pipe work needs to be shut off. Optimized flow control allows the required flow rate of hot and cold water to be regulated, and so water consumption is reduced and energy is saved. Filter angle valves protect both mechanical and electrically controlled taps against suspended particles in the water, allowing the pipe work to easily be flushed through before connecting the tap, stopping any internal damage being done to the product.
Hansgrohe angle valve with cover |
|||||||
|
Hansgrohe single angle valve and cover (not a pair), with 10mm compression fitting, to connect 0.5" piping to flexible hot and cold feed pipes on all relevant Hansgrohe basin and kitchen mixer taps. PLEASE NOTE: Price indicated is for a single angle valve and cover. Please order TWO (one for hot and one for cold pipe) for all standard installations. Colour: Chrome (other finish options in drop-down list below). WRAS Approved Suitable for: Pumped & Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £28.31 (RRP: £38.78 - You save £10.47) |
|||||||
Hansgrohe cover for angle valve |
|||||||
|
The Hansgrohe cover for angle valve (not a pair), will fit the Schell Comfort angle valve with filter, above. Colour: Chrome (other finish options in drop-down list below). Height: 72mm diameter. Suitable for: Pumped & Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £18.79 (RRP: £24.09 - You save £5.30) |
|||||||
Hansgrohe angle valve S |
|||||||
|
Hansgrohe single angle valve S (not a pair), with self-sealing connection thread, wall escutcheon plate and 10mm compression fitting, to connect 0.5" piping to flexible hot and cold feed pipes on all relevant Hansgrohe basin and kitchen mixer taps. PLEASE NOTE: Price indicated is for a single angle valve and cover. Please order TWO (one for hot and one for cold pipe) for all standard installations. Colour: Chrome Suitable for: Pumped & Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £9.22 (RRP: £12.63 - You save £3.41) |
|||||||
Hansgrohe angle valve E |
|||||||
|
Hansgrohe single angle valve E (not a pair), with self-sealing connection thread, wall escutcheon plate and 10mm compression fitting, to connect 0.5" piping to flexible hot and cold feed pipes on all relevant Hansgrohe basin and kitchen mixer taps. PLEASE NOTE: Price indicated is for a single angle valve and cover. Please order TWO (one for hot and one for cold pipe) for all standard installations. Colour: Chrome Suitable for: Pumped & Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £7.89 (RRP: £10.81 - You save £2.92) |
|||||||
Search for Products:
Product Selector:
Select products by range:
