Puravida 3-hole basin mixer tap, with fixed spout with spray direction can be tilted backwards and forwards to minimise splash back on any basin, Rubit aerator, ceramic stop valves, and complete with 1.25" pop up waste.

Flow rate:
With flow regulator: 7 litres/min at 3bar.
Without flow regulator: 13 litres/min at 3bar.

Suitable for use with combination boilers producing a minimum of 1.5 bar pressure at the point where the mixer is fitted.

Please note: Significant differences in pressure on the hot and cold pipes should be balanced.

Colour: Chrome

Length: Spout: 150mm from pipe hole centre to end of spout.

Width: 200mm between tap hole centres. 312mm between ends of tap levers.

Suitable for: Pumped & Pressurised Systems

Metropol E 3-hole basin mixer tap, with fixed spout, Rubit aerator, ceramic stop valves, and complete with 1.25" pop up waste.

Flow rate:
With flow regulator: 7 litres/min at 3bar.
Without flow regulator: 13 litres/min at 3bar.

Suitable for use with combination boilers producing a minimum of 1.5 bar pressure at the point where the mixer is fitted.

Please note: Significant differences in pressure on the hot and cold pipes should be balanced.

Colour: Chrome

Length: Spout: 156mm from pipe hole centre to end of spout.

Width: 200mm between tap hole centres. 312mm between ends of tap levers.

Height: 133mm to top of spout.

Suitable for: Pumped & Pressurised Systems

Metropol S 3-hole basin mixer tap, with fixed spout, Rubit aerator, ceramic stop valves, and complete with 1.25" pop up waste.

Flow rate:
With flow regulator: 7 litres/min at 3bar.
Without flow regulator: 14 litres/min at 3bar.

Suitable for use with combination boilers producing a minimum of 1.5 bar pressure at the point where the mixer is fitted.

Please note: Significant differences in pressure on the hot and cold pipes should be balanced.

Colour: Chrome

WRAS Approved

Length: Spout: 130mm from pipe hole centre to centre of water outlet nozzle.

Width: 200mm between tap hole centres. 253mm between edges of tap hole cover plates.

Suitable for: Pumped & Pressurised Systems