Hansgrohe Raindance Rainmaker AIR 60cm overhead shower, without lighting

Raindance Rainmaker AIR overhead shower, without lighting. 3 all-over Whirl AIR massage jets can be used individually or at the same time. Over 350 spray outlets, and 5 possible AIR spray modes: Rain AIR (central 30cm overhead shower function), Rain AIR XXL (60cm all over, gentle rain), Whirl AIR (3 rotating AIR massage jets, and 3 mixed combinations. With Rubit cleaning system and high-flow thermostat.

THIS RAINMAKER "SHOWER HEAD ONLY" OPTION, IS FOR IF YOU WANT THE THERMOSTAT, SHUT-OFF VALVE ETC IN A PARTICULAR AXOR RANGE, AND NOT THE STANDARD HANSGROHE DESIGN (AS IN "COMPLETE SET" OPTION BELOW, EFFECTIVELY BEING THE SAME DESIGN AS AXOR UNO). IF YOU DO WANT AN ALTERNATIVE DESIGN, PLEASE CLICK ON THE FOLLOWING LINKS TO CHOOSE.

You will also need a QUATTRO diverter - 0.75 inch and a separate shut-off valve (0.75 inch) to operate this product. You will also require the base set ceiling connection, which is found four products down from here on this page.

A £100 REFUND: The Hansgrohe high-flow thermostat 15715 000 is included with the Rainmaker as standard. Therefore, if you are choosing a different range of controls, you will also need to include a matching high-flow thermostat, and be left with the original one supplied. However, Aquabrand can offer a £100 refund if the high flow thermostat is returned to us by signed delivery in its original packaging. with product and packaging in perfect condition.

PLEASE SEE BELOW FOR STANDARD COMPLETE SET-UP.

Flow rates:
Rain AIR: 20 litres/min at 3 bar
Rain AIR XXL: 28 litres/min at 3 bar
Whirl AIR: 25 litres/min at 3 bar
Whirl AIR plus Rain AIR XXL: 35 litres/min at 3 bar
Recommended minimum working pressure: 3 bar.
PLEASE NOTE: It is recommended that you talk to a good plumber who can advise you on the size of stored hot water tank and hot water usage that you will require to operate this set-up for any given time.

Colour: Chrome

Width: Total: 610mm diameter; Shower part: 528mm x 282mm

Suitable for: Pumped & Pressurised Systems