Hansgrohe Raindance 18cm, 24cm and 30cm Overhead Showers

Raindance 180mm overhead shower (not with AIR injection), with 18cm diameter head and 10cm long (Ø 27mm) ceiling connection. 105 water outlets and with Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome

Height: 120mm

Raindance AIR Plate 180mm overhead shower, with 18cm diameter head and 10cm long (Ø 27mm) ceiling connection. 105 water outlets and with Air Injection Technology and Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

SAVING WATER: For ECOflow version (27464 000) with restricted water flow of 9.5 litres/min at 3 bar, please see the drop down menu below.

Colour: Chrome

Height: 120mm

Raindance Classic 180mm AIR Plate overhead shower, with 18cm diameter head, curving on sides towards edge to 21.5cm, and 10cm long (Ø 27mm) ceiling connection. 105 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome (other finish options below).

Width: 214mm diameter

Height: 177mm from ceiling down to rim.

Raindance AIR Plate 240mm overhead shower, with 24cm diameter head and 10cm long (Ø 27mm) ceiling connection. 180 water outlets and with Air Injection Technology and Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 18 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

SAVING WATER: For ECOflow version (27463 000) with restricted water flow of 9.5 litres/min at 3 bar, please see the drop down menu below.

Colour: Chrome

Height: 120mm

Raindance Classic 240mm AIR Plate overhead shower, with 24cm diameter head, curving on sides towards edge at 27cm, and 10cm long (Ø 27mm) ceiling connection. 180 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 18 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome (other finish options below).

Width: 270mm diameter

Height: 177mm from ceiling down to rim.

Raindance AIR Plate 300mm overhead shower, with 30cm diameter head and 10cm long (Ø 27mm) ceiling connection. 225 water outlets and with Air Injection Technology and Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 22 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome

Height: 130mm

Raindance Classic 300mm AIR Plate overhead shower, with 30cm diameter head, curving on sides towards edge at 33cm, and 10cm long (Ø 27mm) ceiling connection. 225 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 22 litres/min at 3 bar.

Please note: If you wish to extend the drop of this overhead from the ceiling by a further 10cm, please purchase an "extension piece for Raindance overhead showers" from the Axor Raindance Overhead page. It is recommended that a maximum of 2 extension pieces (3 parts in total) should be used, giving a total drop of 30cm to the shower head.

Colour: Chrome (other finish options below).

Width: 330mm diameter

Height: 181mm from ceiling down to rim.

Raindance 180mm overhead shower (not with AIR injection), with 18cm diameter head and ball joint, wall mounted by 241mm projection (Ø 23mm) shower arm with wall cover plate. 105 water outlets and Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Colour: Chrome

Raindance AIR Plate 180mm overhead shower, with 18cm diameter head and ball joint, wall mounted by 241mm projection (Ø 23mm) shower arm with wall cover plate. 105 water outlets and with Air Injection Technology and Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

SAVING WATER: For ECOflow version (27462 000) with restricted water flow of 9.5 litres/min at 3 bar, please see the drop down menu below.

Colour: Chrome

Raindance AIR Plate 180mm overhead shower, with 18cm diameter head and ball joint, wall mounted by 389mm projection (Ø 23mm) shower arm with wall cover plate. 105 water outlets and with Air Injection Technology and Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Colour: Chrome

Raindance Classic AIR Plate 180mm overhead shower, with 18cm diameter head, curving on sides towards edge to 21.5cm, wall mounted by 383mm projection (Ø 23mm) shower arm with wall cover plate. 105 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 1.5 bar.
Flow rate: 18 litres/min at 3 bar.

Colour: Chrome (other finish options below).

Length: 496mm from wall to far edge of head.

Width: 214mm diameter

Raindance AIR Plate 240mm overhead shower, with 24cm diameter head and ball joint, wall mounted by 389mm projection (Ø 23mm) shower arm with wall cover plate. 180 water outlets and with Air Injection Technology and Rubit cleaning system. Ridged finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 18 litres/min at 3 bar.

SAVING WATER: For ECOflow version (27461 000) with restricted water flow of 9.5 litres/min at 3 bar, please see the drop down menu below.

Colour: Chrome

Raindance Classic AIR Plate 240mm overhead shower, with 24cm diameter head, curving on sides towards edge to 27cm, wall mounted by 383mm projection (Ø 23mm) shower arm with wall cover plate. 180 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 18 litres/min at 3 bar.

Colour: Chrome (other finish options below).

Length: 524mm from wall to far edge of head.

Width: 270mm diameter

Raindance AIR Plate 300mm overhead shower, with 30cm diameter head and ball joint, wall mounted by 383mm projection (Ø 23mm) shower arm with wall cover plate. 225 water outlets and with Air Injection Technology and Rubit cleaning system. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 22 litres/min at 3 bar.

Colour: Chrome

Raindance AIR Plate 300mm overhead shower, with 30cm diameter head and ball joint, wall mounted by 459mm projection (Ø 23mm) shower arm with wall cover plate. 225 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 22 litres/min at 3 bar.

Image shows version with 39cm arm. No image of 45cm arm version presently available.

Colour: Chrome

Raindance Classic AIR Plate 300mm overhead shower, with 30cm diameter head, curving on sides towards edge to 33cm, wall mounted by 459mm projection (Ø 23mm) shower arm with wall cover plate. 225 water outlets and with Air Injection Technology and QuickClean anti-limescale system. Shower head on swivel ball joint with tilt through 26° from centre. Smooth finish to shower face.

Recommended minimum working pressure: 2 bar.
Flow rate: 22 litres/min at 3 bar.

Colour: Chrome (other finish options below).

Length: 624mm from wall to far edge of head.

Width: 330mm diameter

Fixing plate for 24mm diameter Raindance shower arms, applicable to shower arms used for 18cm and 24cm Raindance overheads only.

For fitting on top of tiling or wall surface (not concealed).

Not essential for installation but may be considered for giving extra support in situations where an 18cm or 24cm overhead combined with a shower arm is felt to produce too much weight on the wall area. Secure and proper fixing of the concealed pipework will in most cases provide adequate support, but if in any serious doubt, the fixing plate should be added.

Please note: the Royale overhead arm (27410 000) comes with its own fixing plate as standard, due to the significant weight of the head.

Colour: Chrome

Width: 92mm diameter

Depth: 13mm thick