|
Hansgrohe Electronic Basin Mixers:
SAVE UP TO 70% ON YOUR BASIN WATER USAGE.
Hansgrohe electronic basin mixers provide a perfect solution to saving water in the bathroom. Infra red sensors are being seen more and more on washroom products in public areas and businesses. The reason for this is twofold - it saves money and is hygienic. Rising domestic water charges and the present need for sustainability of our resources mean that such technology is no longer only for commercial use. Hansgrohe once again are leading the way in the industry with a wide choice in electronic basin mixer styles.
Please phone us on 0870 743 0917 or email us using the links below, if you wish to you discuss these or any other Hansgrohe products.
|
Review your basket
Axor Starck X electronic basin mixer tap, with temperature control (Mains Connected)
|
|
Stark X electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Width: 150mm square
Height: To top: 100mm. To water outlet: 79mm
|
Enlarge image
|
|
Our Price: £580.15 (RRP: £743.78 - You save £163.63)
|
|
Review your basket
Axor Starck X electronic basin mixer tap, with temperature control (Battery Powered)
|
|
Stark X electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Width: 150mm square
Height: To top: 100mm. To water outlet: 79mm
|
Enlarge image
|
|
Our Price: £526.99 (RRP: £675.63 - You save £148.64)
|
|
Review your basket
Axor Starck X electronic basin mixer tap (Mains Connected)
|
|
Stark X electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Width: 150mm square
Height: To top: 100mm. To water outlet: 79mm
|
Enlarge image
|
|
Our Price: £535.24 (RRP: £686.20 - You save £150.96)
|
|
Review your basket
Axor Starck X electronic basin mixer tap (Battery Powered)
|
|
Stark X electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Width: 150mm square
Height: To top: 100mm. To water outlet: 79mm
|
Enlarge image
|
|
Our Price: £486.67 (RRP: £623.93 - You save £137.26)
|
|
Review your basket
Axor Starck electronic basin mixer tap, with temperature control (Mains Connected)
|
|
Stark electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
For Steel finish option, see the drop down menu below.
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 103mm
Height: To top of shaft: 177mm. To water outlet: 90mm
|
Enlarge image
|
|
Our Price: £492.16 (RRP: £630.98 - You save £138.82)
|
|
Review your basket
Axor Starck electronic basin mixer tap, with temperature control (Battery Powered)
|
|
Stark electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
For Steel finish option, see the drop down menu below.
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 103mm
Height: To top of shaft: 177mm. To water outlet: 90mm
|
Enlarge image
|
|
Our Price: £447.25 (RRP: £573.40 - You save £126.15)
|
|
Review your basket
Axor Starck electronic basin mixer tap (Mains Connected)
|
|
Stark electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
For Steel finish option, see the drop down menu below.
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 103mm
Height: To top of shaft: 177mm. To water outlet: 90mm
|
Enlarge image
|
|
Our Price: £447.25 (RRP: £573.40 - You save £126.15)
|
|
Review your basket
Axor Starck electronic basin mixer tap (Battery Powered)
|
|
Stark electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
For Steel finish option, see the drop down menu below.
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 103mm
Height: To top of shaft: 177mm. To water outlet: 90mm
|
Enlarge image
|
|
Our Price: £405.09 (RRP: £519.35 - You save £114.26)
|
|
Review your basket
Axor Steel electronic basin mixer tap, with temperature control (Battery Powered)
|
|
Steel electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Steel Optic (Picture shows Chrome version)
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 135mm
|
Enlarge image
|
|
Our Price: £600.31 (RRP: £769.63 - You save £169.32)
|
|
Review your basket
Axor Steel electronic basin mixer tap, with temperature control (Mains Connected)
|
|
Steel electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: Cannot be used with a Combination boiler.
Please Note: If running with a pump, it should be a negative head pump.
Colour: Steel Optic (Picture shows Chrome version)
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 135mm
|
Enlarge image
|
|
Our Price: £636.97 (RRP: £816.63 - You save £179.66)
|
|
Review your basket
Axor Steel electronic basin mixer tap (Battery Powered)
|
|
Steel electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Steel Optic (Picture shows Chrome version)
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 135mm
|
Enlarge image
|
|
Our Price: £559.07 (RRP: £716.75 - You save £157.68)
|
|
Review your basket
Axor Steel electronic basin mixer tap (Mains Connected)
|
|
Steel electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Steel Optic (Picture shows Chrome version)
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 135mm
|
Enlarge image
|
|
Our Price: £592.06 (RRP: £759.05 - You save £166.99)
|
|
Review your basket
Hansgrohe Talis S2 electronic basin mixer tap, with temperature control, and thief proof aerator (Mains Connected)
|
|
Talis S2 electronic basin mixer tap with external temperature control, and thief proof aerator nozzle, ideal for public areas. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 108mm
Height: To top of shaft: 165mm. To water outlet: 119mm
|
|
|
|
Manufacturer Reference: 32112000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £292.37 (RRP: £374.83 - You save £82.46)
|
|
Review your basket
Hansgrohe Talis S2 electronic basin mixer tap, with temperature control, and thief proof aerator (Battery Powered)
|
|
Talis S2 electronic basin mixer tap with external temperature control, and thief proof aerator nozzle, ideal for public areas. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 108mm
Height: To top of shaft: 165mm. To water outlet: 119mm
|
|
|
|
Manufacturer Reference: 32110000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £276.78 (RRP: £354.85 - You save £78.07)
|
|
Review your basket
Hansgrohe Talis S2 electronic basin mixer tap, with thief proof aerator (Mains Connected)
|
|
Talis S2 electronic basin mixer tap with internal (adjustable) temperature control, and thief proof aerator nozzle, ideal for public areas. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 108mm
Height: To top of shaft: 165mm. To water outlet: 119mm
|
|
|
|
Manufacturer Reference: 32113000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £270.37 (RRP: £346.63 - You save £76.26)
|
|
Review your basket
Hansgrohe Talis S2 electronic basin mixer tap (Battery Powered)
|
|
Talis S2 electronic basin mixer tap with internal (adjustable) temperature control, and thief proof aerator nozzle, ideal for public areas. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 6 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 108mm
Height: To top of shaft: 165mm. To water outlet: 119mm
|
|
|
|
Manufacturer Reference: 32111000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £254.79 (RRP: £326.65 - You save £71.86)
|
|
Review your basket
Hansgrohe Metris S electronic basin mixer tap, with temperature control (Mains Connected)
|
|
Metris S electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 128mm
Height: To top of spout: 170mm. To water outlet: 145mm
|
|
|
|
Manufacturer Reference: 31102000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £395.93 (RRP: £507.60 - You save £111.67)
|
|
Review your basket
Hansgrohe Metris S electronic basin mixer tap, with temperature control (Battery Powered)
|
|
Metris S electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 128mm
Height: To top of spout: 170mm. To water outlet: 145mm
|
|
|
|
Manufacturer Reference: 31100000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £377.60 (RRP: £484.10 - You save £106.50)
|
|
Review your basket
Hansgrohe Metris S electronic basin mixer tap (Mains Connected)
|
|
Metris S electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 128mm
Height: To top of spout: 170mm. To water outlet: 145mm
|
|
|
|
Manufacturer Reference: 31103000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £365.69 (RRP: £468.83 - You save £103.14)
|
|
Review your basket
Hansgrohe Metris S electronic basin mixer tap (Battery Powered)
|
|
Metris S electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 128mm
Height: To top of spout: 170mm. To water outlet: 145mm
|
|
|
|
Manufacturer Reference: 31101000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £345.52 (RRP: £442.98 - You save £97.46)
|
|
Review your basket
Hansgrohe Talis E electronic basin mixer tap, with temperature control (Mains Connected)
|
|
Talis E electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 130mm
|
|
|
|
Manufacturer Reference: 15180000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £492.16 (RRP: £630.98 - You save £138.82)
|
|
Review your basket
Hansgrohe Talis E electronic basin mixer tap, with temperature control (Battery Powered)
|
|
Talis E electronic basin mixer tap with external temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 130mm
|
|
|
|
Manufacturer Reference: 15100000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £463.75 (RRP: £594.55 - You save £130.80)
|
|
Review your basket
Hansgrohe Talis E electronic basin mixer tap (Mains Connected)
|
|
Talis E electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. 230 volt mains connection. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 130mm
|
|
|
|
Manufacturer Reference: 15181000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £454.58 (RRP: £582.80 - You save £128.22)
|
|
Review your basket
Hansgrohe Talis E electronic basin mixer tap (Battery Powered)
|
|
Talis E electronic basin mixer tap with internal (adjustable) temperature control. Infra red electronic sensor and manual stop function for cleaning the basin. Lithium CR-P2 6V battery with battery back-up for up to 6 hours. Free minimum 2-year service. Flexible hoses. 1.5 - 3 seconds water flow follow on time and automatic switching-off after 35 seconds.
Additional Items Required: To connect the hot and cold flexible tails of this and all other Hansgrohe electronic basin mixers listed here (to standard 0.5inch copper piping), you will require a pair of angle valves.
Flow rate: 5.5 litres per minute at 3bar.
Minimum recommended working pressure: 1.5 bar
Please Note: If running with a pump, it should be a negative head pump.
Colour: Chrome
Length: Horizontally from tap hole centre across to centre of water outlet in spout: 122mm
Height: To top of spout: 193mm. To water outlet: 130mm
|
|
|
|
Manufacturer Reference: 15101000
|
Delivery: Orders placed before 12.00PM can normally be delivered 2-4 days (Parcelforce) |
|
Manufacturer:
Hansgrohe
|
Request Further Info » |
|
Enlarge image
|
|
Our Price: £428.92 (RRP: £549.90 - You save £120.98)
|
|