Stuart Turner Pumps
Categories » Stuart Turner Pumps
Most Hansgrohe shower products, particularly showers with higher flow rates are manufactured to require a minimum of 1.5bar - 2bar working pressure in order to operate at their optimum level. 3bar to 4bar pressure is recommended for very high flow rate shower systems, including the Raindance Rainmaker and Raindance Royale overhead showers and shower systems that require two outlets or more to run at the same time. Low pressure options are available on many basin and bidet taps. Always make sure you use a well qualified plumber who can advise you correctly on your pressure rating and whether you require a positive or negative head pump. Please check with us if you are unsure about the pressure requirements of a product or shower set-up.
Stuart Turner Monsoon 2 bar Twin impeller pump (2.0 bar Positive Head) |
|||||||
|
Stuart Turner Monsoon Positive 2.0 bar twin high-pressure pump is driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. If a pump is required, Hansgrohe recommend Stuart Turner Monsoon pumps for use with all Hansgrohe, Axor, Pharo and Raindance collections. WRAS Approved
|
 Enlarge image
|
||||||
|
Our Price: £370.14 (RRP: £476.44 - You save £106.30) |
|||||||
Stuart Turner Monsoon 3 bar Twin impeller pump (3.0 bar Positive Head) |
|||||||
|
Stuart Turner Monsoon Positive 3.0 bar twin high-pressure pump is driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. This product and the Aktivated 3.0 bar positive twin (AKTIV3BP) are recommended by Hansgrohe to receive the best performance from their Pharo range, when a pump is required. If a pump is required, Hansgrohe recommend Stuart Turner Monsoon pumps for use with all Hansgrohe, Axor, Pharo and Raindance collections. WRAS Approved
|
 Enlarge image
|
||||||
|
Our Price: £358.61 (RRP: £530.23 - You save £171.62) |
|||||||
Stuart Turner Monsoon 4 bar Twin impeller pump (4.0 bar Positive Head) |
|||||||
|
Stuart Turner Monsoon Positive 4.0 bar twin high-pressure pump driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies to the more demanding high pressure systems the 4.0 bar twin can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Supplied ready to install the pump is fitted with a flow switch, which requires a minimum flow rate of 0.5 l/min to operate. If a pump is required, Hansgrohe recommend Stuart Turner Monsoon pumps for use with all Hansgrohe, Axor, Pharo and Raindance collections. WRAS Approved
|
 Enlarge image
|
||||||
|
Our Price: £519.98 (RRP: £717.22 - You save £197.24) |
|||||||
Stuart Turner Monsoon 2 bar Twin impeller pump (2.0 bar Negative Head) |
|||||||
|
Stuart Turner Monsoon Negative 2.0 bar twin high-pressure pump driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Is designed to be installed into systems where some or all of the outlets are above the cold water cistern (a negative position) but the requirements is for a fully automatic pump. If a pump is required, Hansgrohe recommend Stuart Turner Monsoon pumps for use with all Hansgrohe, Axor, Pharo and Raindance collections. WRAS Approved
|
 Enlarge image
|
||||||
|
Our Price: £485.41 (RRP: £634.38 - You save £148.97) |
|||||||
Stuart Turner Monsoon 3 bar Twin impeller pump (3.0 bar Negative Head) |
|||||||
|
Stuart Turner Monsoon N 3.0 bar twin high-pressure pump driven by a continuously rated thermally protected induction motor. Designed to boost both the hot and cold water supplies it can be used to boost water pressure to a shower, bathroom, whole flats / houses and commercial premises. Is designed to be installed into systems where some or all of the outlets are above the cold water cistern (a negative position) but the requirement is for a fully automatic pump. If a pump is required, Hansgrohe recommend Stuart Turner Monsoon pumps for use with all Hansgrohe, Axor, Pharo and Raindance collections. WRAS Approved
|
 Enlarge image
|
||||||
|
Our Price: £481.56 (RRP: £689.04 - You save £207.48) |
|||||||
Stuart Turner Monsoon 4 bar Twin impeller pump (4.0 bar Negative Head) |
|||||||
|
Stuart Turner Monsoon N 4.0 bar twin extends the range of Monsoon negative twin pumps. This model has been developed to meet the demand for both higher flow and pressure, which can be required in the larger domestic system, multi-outlet shower and shower cabins particularly where steam generators are used. As with all monsoon negative twin pumps the N 4.0 bar twin is fully automatic with no commissioning required. If a pump is required, Hansgrohe recommend Stuart Turner Monsoon pumps for use with all Hansgrohe, Axor, Pharo and Raindance collections. WRAS Approved
|
 Enlarge image
|
||||||
|
Our Price: £658.31 (RRP: £877.32 - You save £219.01) |
|||||||
Search for Products:
Want us to call you?
