Exafill Complete bath filler with waste (finish set & concealed parts) for standard size bath tubs, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle, plug and concealed working parts (58125 180) 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

If you require a low pressure option tick the box below. (0.1 Bar pressure) for use on Gravity systems. (Tanks in loft space)

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require the larger bath version of the Exafill basic set (58126 180), as seen below. You will then need to purchase the Finish Set (the overflow and plug visible parts) separately.

Colour: Chrome

WRAS Approved

Suitable for: Combination Boilers and Pressurised Systems

Exafill S bath filler with waste complete set (finish set & concealed parts) for larger size bath tubs. New Exafill version with new slimline design of the overflow housing, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle, plug and concealed working parts, 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require this version of the Exafill S complete set.

ONLY COMPATIBLE WITH HIGH PRESSURE SYSTEMS (above 1bar working pressure, 1.5bar recommended).
Colour: Chrome

Suitable for: Combination Boilers and Pressurised Systems

Exafill S bath filler with waste complete set (finish set & concealed parts) for standard size bath tubs. New Exafill version with new slimline design of the overflow housing, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle, plug and concealed working parts, 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require the larger bath version of the Exafill S bath filler & waste complete set (58117 000, 58116 180), as seen below.

ONLY COMPATIBLE WITH HIGH PRESSURE SYSTEMS (above 1bar working pressure, 1.5bar recommended).
Colour: Chrome

Suitable for: Combination Boilers and Pressurised Systems

Exafill bath filler with waste basic set (the working parts beneath the surface of the bath) for standard size bath tubs, consisting of: 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require the larger bath version of the Exafill basic set (58126 180), as seen below.

If you require a low pressure option tick the box below. (0.1 Bar prssure) for use on Gravity systems. (Tanks in loft space)

For use with Exafill finish sets, overflow and plug - 58127*** (standard) or 58128*** (recessed overflow opening).

WRAS Approved

Suitable for: Combination Boilers and Pressurised Systems

Exafill S bath filler with waste for larger size bath tubs.3 aerated water outlets with 20 degree adjustable angle, plug and concealed working parts, 0.75" waste and overflow.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require this version of the Exafill.
For use with Exafill finish set, overflow and plug - 58117***

Suitable for: Combination Boilers and Pressurised Systems

Exafill bath filler with waste basic set (the working parts beneath the surface of the bath) for larger and special bath tubs, consisting of: 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require this version of the Exafill basic set.

For use with Exafill finish sets, overflow and plug - 58127*** (standard) or 58128*** (recessed overflow opening).

If you require a low pressure option tick the box below. (0.1 Bar prssure) for use on Gravity systems. (Tanks in loft space)

WRAS Approved

Suitable for: Combination Boilers and Pressurised Systems

Exafill bath filler with waste finish set (the overflow and plug visible parts), for larger or special bath tubs with a recessed overflow opening, consisting of: covering plate, 3 aerated water outlets with 25 degree adjustable angle and plug.

If you require a low pressure option tick the box below. (0.1 Bar pressure) for use on Gravity systems. (Tanks in loft space)

PLEASE NOTE: This is the finish set only not the complete set.

Colour: Chrome

WRAS Approved

Width: 75mm

Height: 86mm

Suitable for: Combination Boilers and Pressurised Systems

Exafill bath filler with waste finish set (the overflow and plug visible parts), for standard bath tubs, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle and plug.

If you require a low pressure option tick the box below. (0.1 Bar pressure) for use on Gravity systems. (Tanks in loft space)

PLEASE NOTE: This is the finish set only not the complete set.

Colour: Chrome

WRAS Approved

Width: 75mm

Height: 86mm

Suitable for: Combination Boilers and Pressurised Systems

Exafill S bath filler with waste finish set (the overflow and plug visible parts), for standard and larger or special bath tubs, consisting of: covering plate, 3 aerated water outlets with 25 degree adjustable angle and plug

PLEASE NOTE: This is the finish set only not the complete set.

Suitable for: Combination Boilers and Pressurised Systems