Hansgrohe Exafill - Bath Filler and Waste Combination Flexaplus bath waste

Exafill S bath filler with waste complete set (finish set & concealed parts) for standard size bath tubs. New Exafill version with new slimline design of the overflow housing, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle, plug and concealed working parts, 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require the larger bath version of the Exafill S bath filler & waste complete set (58117 000, 58116 180), as seen below.

The maximum thickness of the bath at the overflow must be no more than 10mm.

ONLY COMPATIBLE WITH HIGH PRESSURE SYSTEMS (above 1bar working pressure, 1.5bar recommended). Please see the Exafill (not Exafill S) for low pressure systems.

Colour: Chrome

Exafill S bath filler with waste complete set (finish set & concealed parts) for larger size bath tubs. New Exafill version with new slimline design of the overflow housing, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle, plug and concealed working parts, 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require this version of the Exafill S complete set.

The maximum thickness of the bath at the overflow must be no more than 10mm.

ONLY COMPATIBLE WITH HIGH PRESSURE SYSTEMS (above 1bar working pressure, 1.5bar recommended). Please see the Exafill (not Exafill S) for low pressure systems.

Colour: Chrome

Exafill Complete bath filler with waste (finish set & concealed parts) for standard size bath tubs, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle, plug and concealed working parts (58125 180) 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require the larger bath version of the Exafill basic set (58126 180), as seen below. You will then need to purchase the Finish Set (the overflow and plug visible parts) separately.

Colour: Chrome

WRAS Approved

Exafill bath filler with waste basic set (the working parts beneath the surface of the bath) for standard size bath tubs, consisting of: 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require the larger bath version of the Exafill basic set (58126 180), as seen below.

The maximum thickness of the bath at the overflow must be no more than 10mm.

For use with Exafill finish sets, overflow and plug - 58127*** (standard) or 58128*** (recessed overflow opening).

WRAS Approved

Exafill bath filler with waste basic set (the working parts beneath the surface of the bath) for larger and special bath tubs, consisting of: 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require this version of the Exafill basic set.

The maximum thickness of the bath at the overflow must be no more than 10mm.

For use with Exafill finish sets, overflow and plug - 58127*** (standard) or 58128*** (recessed overflow opening).

WRAS Approved

Exafill bath filler with waste finish set (the overflow and plug visible parts), for standard bath tubs, consisting of: covering plate, 3 aerated water outlets with 20 degree adjustable angle and plug.

Colour: Chrome

WRAS Approved

Width: 75mm

Height: 86mm

Exafill bath filler with waste finish set (the overflow and plug visible parts), for larger or special bath tubs with a recessed overflow opening, consisting of: covering plate, 3 aerated water outlets with 25 degree adjustable angle and plug.

Colour: Chrome

WRAS Approved

Width: 75mm

Height: 86mm

Flexaplus bath waste & overflow, for sandard size bath tubs (520mm cable length), consisting of handle and plug. Lever position indicates open/closed. Complete with concealed working parts (flexible corrugated overflow, pre-assembled siphon, hair trap), and McAlpine T25 adaptor, required for all bath and shower wastes.

Colour: Chrome

Flexaplus bath waste & overflow, for larger or special bath tubs with recessed overflow opening (780mm cable length), consisting of handle and plug. Lever position indicates open/closed. Complete with concealed working parts (flexible corrugated overflow, pre-assembled siphon, hair trap), and McAlpine T25 adaptor, required for all bath and shower wastes.

Colour: Chrome

Flexaplus S bath waste & overflow, for sandard size bath tubs (520mm cable length), consisting of handle and plug. Complete with concealed working parts (flexible corrugated overflow, pre-assembled siphon, hair trap), and McAlpine T25 adaptor, required for all bath and shower wastes.

With the new Flexaplus S overflow regulation element, the water level can be raised by up to 3cm, enabling you to have a pleasant, enjoyable bath, whatever size your bath is.

Colour: Chrome

Flexaplus S bath waste & overflow, for larger or special bath tubs with recessed overflow opening (780mm cable length), consisting of handle and plug. Complete with concealed working parts (flexible corrugated overflow, pre-assembled siphon, hair trap), and McAlpine T25 adaptor, required for all bath and shower wastes.

With the new Flexaplus S overflow regulation element, the water level can be raised by up to 3cm, enabling you to have a pleasant, enjoyable bath, whatever size your bath is.

Colour: Chrome