Exafill bath filler with waste basic set (the working parts beneath the surface of the bath) for standard size bath tubs, consisting of: 0.75" waste and overflow. Complete with McAlpine T25 adaptor, required for all bath and shower wastes.

Please note:If the distance from the top of the overflow opening, horizontally across to directly above the centre of the plug hole, is more than 260mm OR the distance from the surface of the bath by the plug hole, vertically up to the centre of the overflow opening, is more than 440mm, you will require the larger bath version of the Exafill basic set (58126 180), as seen below.

If you require a low pressure option tick the box below. (0.1 Bar prssure) for use on Gravity systems. (Tanks in loft space)

For use with Exafill finish sets, overflow and plug - 58127*** (standard) or 58128*** (recessed overflow opening).

WRAS Approved

Suitable for: Combination Boilers and Pressurised Systems