Hansgrohe Non Thermostatic Bath Shower Mixer Taps - Exposed
Categories » Hansgrohe AXOR Bath And Shower Mixer Taps And Controls: » Hansgrohe Non Thermostatic Bath Shower Mixer Taps - Exposed
If you want to fit any of the following bath and shower mixers onto the bath rim instead of wall mounting it, please see the Pillar Unions at the bottom of the page. You will need to measure the distance between the centres of the holes in your bath rim to establish whether you require the 150mm or 180mm separation Pillar Unions. The mixers will adjust or - 16mm from these measurements.
Please note that Hansgrohe Pillar Unions are designed for this range of mixers and also the Ecostat thermostatic bath and shower mixers but not the Hansgrohe Axor range.
Hansgrohe Puravida single lever bath & shower mixer tap, for wall mounting |
|||||||
|
Purivida single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £380.84 (RRP: £521.70 - You save £140.86) |
|||||||
Hansgrohe Focus E² single lever bath and shower mixer tap |
|||||||
|
Hansgrohe Focus E² single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. Rubit cleaning system on nozzle. Designed allowing easy installation and all working parts are outside the wall, incoudes bacl flow preventers Distance between outlet pipe centres: 150mm + or - 16mm. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red. Flow rate: approx. 22 litres/min at 3 bar. Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome Length: 189mm - 196.5mm from wall to spout centre. Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £66.04 (RRP: £90.47 - You save £24.43) |
|||||||
Hansgrohe Metropol E single lever bath & shower mixer tap, wall or bath mounting |
|||||||
|
Metropol E single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. Rubit cleaning system on nozzle. Mousseur swivel 15 degrees. Distance between outlet pipe centres: 150mm + or - 16mm. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red Flow rate: approx. 22 litres/min at 3 bar. Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome Length: 167.5mm - 175mm from wall to spout centre. Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £170.70 (RRP: £233.83 - You save £63.13) |
|||||||
Hansgrohe Metropol S single lever bath & shower mixer tap, wall or bath mounting |
|||||||
|
Metropol S single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. Rubit cleaning system on nozzle. Mousseur swivel 15 degrees. Distance between outlet pipe centres: 150mm + or - 16mm. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome Length: 167.5mm - 175mm from wall to spout centre. Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £193.85 (RRP: £265.55 - You save £71.70) |
|||||||
Hansgrohe Metris E single lever bath & shower mixer tap, wall or bath mounting |
|||||||
|
Metris E single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. Mousseur swivel 15 degrees. Distance between outlet pipe centres: 150mm + or - 16mm. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red Flow rate: approx. 22 litres/min at 3 bar. Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome Length: 167.5mm - 175mm from wall to spout centre. Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £146.68 (RRP: £200.93 - You save £54.25) |
|||||||
Hansgrohe Metris S single lever bath & shower mixer tap, wall or bath mounting |
|||||||
|
Metris S single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. Mousseur swivel 15 degrees. Distance between outlet pipe centres: 150mm + or - 16mm. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red Flow rate: approx. 22 litres/min at 3 bar. Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome Length: 167.5mm - 175mm from wall to spout centre. Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £169.41 (RRP: £232.07 - You save £62.66) |
|||||||
Hansgrohe Talis S single lever bath & shower mixer tap, wall or bath mounting |
|||||||
|
Talis S single lever bath and shower mixer tap for wall mounting, with Boltic lever lock. Reverts automatically from shower to bath function. Distance between outlet pipe centres: 150mm + or - 16mm. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions further down on page 14920000,07002300,07002302 Colour: Chrome Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £138.74 (RRP: £190.05 - You save £51.31) |
|||||||
Hansgrohe Focus E single lever bath & shower mixer tap, wall or bath mounting |
|||||||
|
Focus E single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red Flow rate: approx. 22 litres/min at 3 bar. Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome WRAS Approved Length: 180mm from wall to spout centre. Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £79.34 (RRP: £108.69 - You save £29.35) |
|||||||
Hansgrohe Focus S single lever bath & shower mixer tap, wall or bath mounting |
|||||||
|
Focus S single lever bath and shower mixer tap for wall mounting. Reverts automatically from shower to bath function. For Bath Deck mounting measure holes between existing taps they either be 150mm or 180mm, and then choose Pillar unions By using the link below in Red Flow rate: approx. 22 litres/min at 3 bar. Please note: Can be used with Pillar Unions to mount horizontally on bath rim Pillar Unions Colour: Chrome Length: 175mm from wall to spout centre. Suitable for: Combination Boilers and Pressurised Systems
|
 Enlarge image
|
||||||
|
Our Price: £91.78 (RRP: £125.73 - You save £33.95) |
|||||||
Search for Products:
Product Selector:
Select products by range:
