Hansgrohe AXOR Kitchen Mixer Taps

Hansgrohe Axor Citterio semi-professional single lever kitchen mixer tap, with 360 degree swivel spout, incorporating pull-out spray (Isiflex hose with stainless steel spring). Selectable spray modes: Normal and Spray Jet.
With Rubit de-scaling system, ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
With flow limiter: 8 litres/minute at 3 bar.
Without flow limiter: 15 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

Length: 270mm from hole centre to spout centre.

Height: 637mm to top of spout curve.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Starck X semi-professional single lever kitchen mixer tap, with 360 degree swivel spout (further rotating can damage hose), incorporating Isiflex hose with stainless steel spring. Adjustable normal and spray jet.
With joystick ceramic cartridge and Rubit de-scaling system.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome

WRAS Approved

Length: 270mm from hole centre to spout centre.

Height: 656mm to top of spout curve.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Citterio single lever kitchen mixer tap, with pullout spray that swivels through 150 degrees. Selectable spray modes: Normal and Spray Jet.
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
Normal: 10 litres/minute at 3 bar.
Spray Jet: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

Length: 224mm from hole centre to spout centre.

Height: 427mm to top of spout.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Talis S Variarc single lever kitchen mixer tap, with 360 degree swivel spout (further rotating can damage hose), incorporating pull-out spray (non-arresting). Selectable spray modes: Normal and Spray Jet.
With Rubit de-scaling system, ceramic cartridge and Boltic lever lock.
Variable position of handle: right, left or front. Swivel mounted, can be lifted and laid down. Ideal for installation in front of inward opening windows.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
Normal: 9 litres/minute at 3 bar.
Spray Jet: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

Length: 223mm from hole centre to spout centre.

Height: 405mm to top of spout curve.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Talis S Variarc single lever kitchen mixer tap, with 360 degree swivel pull-out spout (Normal flow only, not Spray Jet).
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.
Variable position of handle: right, left or front. Swivel mounted, can be lifted and laid down. Ideal for installation in front of inward opening windows.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 12 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

Length: 209mm from hole centre to spout centre.

Height: 405mm to top of spout curve.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Talis S Variarc single lever kitchen mixer tap, with 360 degree swivel spout.
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.
Variable position of handle: right, left or front.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 12 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

Colour: Chrome (other finish options in drop-down menu below).

Length: 183mm from hole centre to spout centre.

Height: 332mm to top of spout curve.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Uno² single lever kitchen mixer tap, with high 360° swivel spout.
With ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 12 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

WRAS Approved

Length: 214mm from hole centre to spout centre.

Height: 368mm to top of spout.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Uno² twin handle kitchen mixer tap, with high spout that can be simply adjusted to swivel through either 140° or 360°.
With Elastop valves and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 14 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

WRAS Approved

Length: 214mm from hole centre to spout centre.

Height: 380mm to top of spout.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Uno single lever kitchen mixer tap, with long 360° swivel spout.
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.
Variable position of handle: right, left or front.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 13 litres/minute at 3 bar.
Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

Colour: Chrome (other finish options in drop-down menu below).

Length: 241mm from hole centre to spout centre.

Height: 300mm to top of spout.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Citterio single lever kitchen mixer tap, with high spout that can be simply adjusted to swivel through 150° to 360°.
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 13 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

WRAS Approved

Length: 204mm from hole centre to spout centre.

Height: 342mm to top of spout curve.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Montreux two handle kitchen mixer tap, with high 140° swivel spout.
With Ceramic valves.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
With flow limiter: 11 litres/minute at 3 bar.
Without flow limiter: 12 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Montreux twin handle bridge kitchen mixer tap, with high 150° swivel spout.
With Ceramic valves.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
With flow limiter: 11 litres/minute at 3 bar.
Without flow limiter: 12 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Starck single lever kitchen mixer tap, with cylindrical handle design. Spout swivels through 360 degrees.
With joystick cartridge and Rubit de-scaling system.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

WRAS Approved

Length: 220mm from hole centre to spout centre.

Height: 222mm to top of lever.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Starck Classic single lever kitchen mixer tap, with feather handle design. Spout swivels through 360 degrees.
With joystick cartridge and Rubit de-scaling system.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

WRAS Approved

Length: 220mm from hole centre to spout centre.

Height: 218mm to top of lever.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Axor Steel single lever kitchen mixer tap, with pull-out spray that swivels through 130°. Selectable spray modes: Normal and Spray Jet.
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
Normal: 11 litres/minute at 3 bar.
Spray Jet: 10 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Steel

WRAS Approved

Length: 221mm from hole centre to spout centre.

Height: 264mm to top of extended lever.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Metropol single lever kitchen mixer tap, with pull-out spray (non-arresting) that swivels through 160°. Selectable spray modes: Normal and Spray Jet, with anti-pollution function.
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
Normal: 9 litres/minute at 3 bar.
Spray Jet: 12 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

WRAS Approved

Length: 230mm from hole centre to spout centre.

Height: 249mm to top of extended lever.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Metropol single lever kitchen mixer tap, with 360° swivel spout.
With QuickClean de-scaling system, M3 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

WRAS Approved

Length: 209mm from hole centre to spout centre.

Height: 247mm to top of extended lever.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Talis S single lever kitchen mixer tap, with pull-out spray (non-arresting) that swivels through 150°. Selectable spray modes: Normal and Spray Jet, with anti-pollution function.
With Rubit de-scaling system, M2 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rates:
Normal: 10 litres/minute at 3 bar.
Spray Jet: 8 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

WRAS Approved

Length: 222mm from hole centre to spout centre.

Height: 256mm to top of extended lever.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Talis S single lever kitchen mixer tap, with spout that swivels through 150°.
With Rubit de-scaling system, M2 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome (other finish options in drop-down menu below).

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

Length: 224mm from hole centre to spout centre.

Height: 256mm to top of extended lever.

Suitable for: Pumped & Pressurised Systems

Focus E single lever kitchen mixer, with SoftPEX hoses, with spout that swivels through 360°.
With Rubit de-scaling system, M2 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Colour: Chrome

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

WRAS Approved

Length: 220mm from hole centre to spout centre.

Height: 275mm to top of extended lever.

Suitable for: Pumped & Pressurised Systems

Focus S single lever kitchen mixer, with SoftPEX hoses, with spout that swivels through 360°.
With Rubit de-scaling system, M2 ceramic cartridge and Boltic lever lock.

Optional Items recommended: To connect the hot and cold flexible tails (to standard 0.5inch copper piping)a pair of angle valves.

Flow rate: 11 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

WRAS Approved

Length: 220mm from hole centre to spout centre.

Height: 262mm to top of extended lever.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Metropol single lever kitchen mixer tap for wall mounting.
With Rubit de-scaling system, M3 ceramic cartridge and Boltic lever lock.

No Additional Items Required: This product does not require angle valves as it is connected directly to 0.5 inch piping.

Flow rate: 22 litres/minute at 3 bar.

Operates with unvented and Combination boilers with a minimum working pressure of 1.5 bar.

Colour: Chrome

Can be altered for LOW PRESSURE systems (tick low pressure box below before ordering).

Length: 255-263mm from hole centre to spout centre.

Height: 188mm from hole centre down to end of spout.

Suitable for: Pumped & Pressurised Systems

Hansgrohe Pillar Cock 0.5", with Rubit aerator. Without waste.

Flow rate: 7 litres per minute.

Colour: Steel Optic

Length: 103mm from hole centre to spout centre.

Height: 178mm to top of spout curve.

Suitable for: Pumped & Pressurised Systems

Hansgrohe worktop shut-off valve (on and off control) with 27mm diameter shaft and 52mm cover plate, for worktops up to 47mm thick. With 0.75" connection to pipework.

Colour: Chrome (other finish options in drop-down menu below).

Suitable for: Pumped & Pressurised Systems

Hansgrohe concealed liquid soap dispenser. Bottle hangs beneath surface and dispenser sits on top. 330ml filling capacity.

Colour: Chrome (other finish options in drop-down menu below).

Suitable for: Pumped & Pressurised Systems